Preloader
Jump to navigation
Jump to search
| Preloader | |
|---|---|
 |
|
| Games: | LittleBigPlanet 3 |
| Type: | Gadgets |
| Category: | Logic |
| Inputs: | 1 |
| Outputs: | 1 |
| Obtained from: | Start |
 | This page is a work in progress. As a result, the layout and/or content herein may be subject to change. |
Overview
The Preloader is a logic gadget that uses logic or player proximity to preload parts of Dynamic Thermometer levels.
Usage and Behavior
Tweaks
Preload Zone
 |
Place Zone Determines the Preloader's area of effect. |
 |
Load Type: ( Preload •Full Load Determines how much the Preloader loads its chosen area. |
Trigger
 |
Minimum Detection Range: (0.0 - 5,000.0) Determines how close players can get before the Preloader stops detecting them. |
 |
Maximum Detection Range: (0.0 - 5,000.0) Determines how close the player needs to be in order to activate the Preloader; setting this below 0.0 will set the radius to infinite. |
 |
Trigger Angle Range: (0 - 360) Sets the angle radius of the Preloader, with 360 being a full circle. Rotating the gadget changes the orientation of the detection range. |
 |
Layer Detection Range: (0 - 16) Sets how many layers away from the object the Preloader can detect players. |
Behaviour
 |
Require All Players: ( No • Yes If set to Yes, all players in the game must be within the Preloader's radius to activate it. |
Visuals
 |
Electronics and Cable Visibility: (No • Switch Visible • Switch and Cables Visible Determines whether or not the gadget (and any outgoing wires) will be rendered in Play Mode. |
Gallery
Model Renders
Preloader
