Sackbot Waypoints

Sackbot Waypoints
Dummy link
Games:	LittleBigPlanet 2
Type:	Gameplay Kits
Category:	Sackbots
Inputs:	1
Obtained from:	Start

This page is a work in progress. As a result, the layout and/or content herein may be subject to change.

Overview

Sackbot Waypoints are a scrapped type of LittleBigPlanet 2 gadget that would have controlled a Sackbot's actions, and were replaced with the ability to control a Sackbot via a Controlinator. The models for Sackbot Waypoints are based on the Creature Navigator.

A general waypoint type exists in the Deploy Build, and colored waypoint types can be found in the LBP2 2010 Pre-alpha. In the LittleBigPlanet 2 Beta three of the colored types can be found in the early Rookie Test level, though they don't function properly.

Although all the Sackbot Waypoints are built around the same piece of logic, each of them has a different function. There are four main waypoint types, Grab, Jump, Layer Change, and Walk, as well as three other minor variants.

Sackbots have a tweak option called "Follow Waypoint" that makes them follow a Tag, though whether or not the function used to be related to Sackbot Waypoints is uncertain.

General Waypoint

This Waypoint is referred to as just Sackbot_Waypoint internally, and the name Waypoint shows up when it's tweaked. It can be placed outside of a Sackbot's Circuit Board, but has no apparent function.

Tweaks

Tag Colour: ( •‎ •‎ •‎ •‎ •‎ •‎ •‎ ) Sets the colour channel for the gadget. Sensors will only detect Tags matching this colour.

Jump Command

This Waypoint is referred to as Sackbot_Jump internally. In can only be placed on Sackbot Circuit Boards and cannot be tweaked.

It makes the Sackbot it's on jump as long as it is active.

Grab Command

This Waypoint is referred to as Sackbot_Grab internally. In can only be placed on Sackbot Circuit Boards and cannot be tweaked.

It makes the Sackbot it's on grab as long as it is active.

Layer Change Command

This Waypoint is referred to as Sackbot_LayerChange internally, and can be tweaked.

It makes the Sackbot it's on change layers as long as it is active, forwards or backwards based on the direction setting.

Tweaks

Tag Colour: ( •‎ •‎ •‎ •‎ •‎ •‎ •‎ ) Sets the colour channel for the gadget. Sensors will only detect Tags matching this colour.

A direction tweak is present, with No making the Sackbot move forwards and Yes making the Sackbot move backwards.

Walk Command

This Waypoint is referred to as Sackbot_Walk internally, and can be tweaked. It can be placed outside of a Sackbot's Circuit Board, but doesn't appear to have a use when outside of one.

It makes the Sackbot it's on walk in one direction as long as it is active, left or right and faster or slower based on the signal strength.

Tweaks

The tweaks for the Walk Command waypoint appear to ripped directly from the Layer Change Command waypoint, and don't function properly.

Tag Colour: ( •‎ •‎ •‎ •‎ •‎ •‎ •‎ ) Sets the colour channel for the gadget. Sensors will only detect Tags matching this colour.

A direction tweak is present but has no effect because the direction is based on signal strength.

Point Of Interest

This Waypoint is referred to as Sackbot_LookAt internally, and the name Point Of Interest shows up when it's tweaked. It can be placed outside of a Sackbot's Circuit Board, and the Sackbot will turn its head to look in its direction.

Tweaks

Tag Colour: ( •‎ •‎ •‎ •‎ •‎ •‎ •‎ ) Sets the colour channel for the gadget. Sensors will only detect Tags matching this colour.

Gun Target

This Waypoint is referred to as Sackbot_GunTarget internally, though only the name Waypoint shows up when tweaked. It can be placed outside of a Sackbot's Circuit Board, and the Sackbot will aim its equipped Gun in its direction.

Tweaks

Tag Colour: ( •‎ •‎ •‎ •‎ •‎ •‎ •‎ ) Sets the colour channel for the gadget. Sensors will only detect Tags matching this colour.

Internal References

Information about Waypoints as they're referenced in the internal gamedata and editor settings.

Waypoint IDs

The function of a Waypoint is determined by it's Waypoint ID, which is determined by the Enum ESwitchInputUpdateType.

Below is a list of values from the Enum in relation to the Waypoint IDs.

Name	ID
	Int	Hex
Sackbot_Waypoint	11	0B
Sackbot_LookAt	12	0C
Sackbot_Jump	13	0D
Sackbot_Grab	14	0E
Sackbot_LayerChange	15	0F
Sackbot_GunTarget	16	10
Sackbot_Walk	17	11

Waypoint Colors

The four main Sackbot Waypoints have colors that relate to their type, and also whether they're active or not. The values for these colors are stored in the same compression format as GUIDs (oGUIDs).

Below is a list of color values for each Waypoint along with additional colors that would match on the color wheel.

Name	Inactive			Active
	Bit Color	Hex Color	oGUID	Bit Color	Hex Color	oGUID
Walk Command (Pink)	1061098303	3F3F133F	BFA6FCF903	4294921471	FFFF4CFF	FF99FDFF0F
Jump Command (Red)	1061098259	3F3F1313	93A6FCF903	4294921292	FFFF4C4C	CC98FDFF0F
Layer Change Command (Yellow)	1061109523	3F3F3F13	93FEFCF903	4294967116	FFFFFF4C	CCFEFFFF0F
Grab Command (Green)	1058225939	3F133F13	93FECCF803	4283236172	FF4CFF4C	CCFEB3FA0F
Cyan	1058225983	3F133F3F	BFFECCF803	4283236351	FF4CFFFF	FFFFB3FA0F
Blue	1058214719	3F13133F	BFA6CCF803	4283190527	FF4C4CFF	FF99B1FA0F
White	1061109567	3F3F3F3F	BFFEFCF903	4294967295	FFFFFFFF	FFFFFFFF0F

Template:LBP2Gadgets